Muscular Endurance and Strength
On today's battlefield, in addition to cardiorespiratory fitness, soldiers need a high level of muscular endurance and strength. In a single day they may carry injured comrades, move equipment, lift heavy tank or artillery rounds, push stalled vehicles, or do many other strength-related tasks. For example, based on computer-generated scenarios of an invasion of Western Europe, artillerymen may have to load from 300 to 500, 155mm-howitzer rounds (95-lb rounds) while moving from 6 to 10 times each day over 8 to 12 days. Infantrymen may need to carry loads exceeding 100 pounds over great distances, while supporting units will deploy and displace many times. Indeed, survival on the battlefield may, in large part, depend on the muscular endurance and strength of the individual soldier.
Muscular fitness has two components: muscular strength and muscular endurance.
Muscular strength is the greatest amount of force a muscle or muscle group can exert in a single effort.
Muscular endurance is the ability of a muscle or muscle group to do repeated contractions against a less-than-maximum resistance for a given time.
Although muscular endurance and strength are separate fitness components, they are closely related. Progressively working against resistance will produce gains in both of these components.
Isometric, isotonic, and isokinetic muscular endurance and strength are best produced by regularly doing each specific kind of contraction. They are described here.
Isometric contraction produces contraction but no movement, as when pushing against a wall. Force is produced with no change in the angle of the joint.
Isotonic contraction causes a joint to move through a range of motion against a constant resistance. Common examples are push-ups, sit-ups, and the lifting of weights.
Isokinetic contraction causes the angle at the joint to change at a constant rate, for example, at 180 degrees per second. To achieve a constant speed of movement, the load or resistance must change at different joint angles to counter the varying forces produced by the muscle(s) at different angles. This requires the use of isokinetic machines. There are other resistance-training machines which, while not precisely controlling the speed of movement, affect it by varying the resistance throughout the range of motion. Some of these devices are classified as pseudo-isokinetic and some as variable-resistance machines.
Isotonic and isokinetic contractions have two specific phases - the concentric or "positive" phase and the eccentric or "negative" phase. In the concentric phase (shortening) the muscle contracts, while in the eccentric phase (elongation) the muscle returns to its normal length. For example, on the upward phase of the biceps curl, the biceps are shortening. This is a concentric (positive) contraction. During the lowering phase of the curl the biceps are lengthening. This is an eccentric (negative) contraction.
A muscle can control more weight in the eccentric phase of contraction than it can lift concentrically. As a result, the muscle may be able to handle more of an overload eccentrically. This greater overload, in return, may produce greater strength gains. The nature of the eccentric contraction, however, makes the muscle and connective tissue more susceptible to damage, so there is more muscle soreness following eccentric work.
When a muscle is overloaded, whether by isometric, isotonic, or isokinetic contractions, it adapts by becoming stronger. Each type of contraction has advantages and disadvantages, and each will result in strength gains if done properly.
The above descriptions are more important to those who assess strength than to average people trying to develop strength and endurance. Actually, a properly designed weight training program with free weights or resistance machines will result in improvements in all three of these categories.
Principles of Muscular Training
To have a good exercise program, the seven principles of exercise, described in Chapter 1, must be applied to all muscular endurance and strength training. These principles are overload, progression, specificity, regularity, recovery, balance, and variety.
The overload principle is the basis for all exercise training programs. For a muscle to increase in strength, the workload to which it is subjected during exercise must be increased beyond what it normally experiences. In other words, the muscle must be overloaded. Muscles adapt to increased workloads by becoming larger and stronger and by developing greater endurance.
| To understand the principle of overload, it is important to know the following strength-training terms:
- Full range of motion. To obtain optimal gains, the overload must be applied throughout the full range of motion. Exercise a joint and its associated muscles through its complete range starting from the pre-stretched position (stretched past the relaxed position) and ending in a fully contracted position. This is crucial to strength development.
- Repetition. When an exercise has progressed through one complete range of motion and back to the beginning, one repetition has been completed.
- One-repetition maximum (1-RM). This is a repetition performed against the greatest possible resistance (the maximum weight a person can lift one time). A 10-RM is the maximum weight one can lift correctly 10 times. Similarly, an 8-12 RM is that weight which allows a person to do from 8 to 12 correct repetitions. The intensity for muscular endurance and strength training is often expressed as a percentage of. the 1-RM.
- Set. This is a series of repetitions done without rest.
- Muscle Failure. This is the inability of a person to do another correct repetition in a set.
When a muscle is overloaded by isometric, isotonic, or isokinetic contractions, it adapts by becoming stronger.
The minimum resistance needed to obtain strength gains is 50 percent of the 1-RM. However, to achieve enough overload, programs are designed to require sets with 70 to 80 percent of one's 1-RM. (For example, if a soldier's 1-RM is 200 pounds, multiply 200 pounds by 70 percent [200 X 0.70 = 140 pounds] to get 70 percent of the 1-RM.)
A better and easier method is the repetition maximum (RM) method. The exerciser finds and uses that weight which lets him do the correct number of repetitions. For example, to develop both muscle endurance and strength, a soldier should choose a weight for each exercise which lets him do 8 to 12 repetitions to muscle failure. (See Figure 3-1.) The weight should be heavy enough so that, after doing from 8 to 12 repetitions, he momentarily cannot correctly do another repetition. This weight is the 8-12 RM for that exercise.
MUSCULAR ENDURANCE/STRENGTH DEVELOPMENT
To develop muscle strength, the weight selected should be heavier and the RM will also be different. For example, the soldier should find that weight for each exercise which lets him do 3 to 7 repetitions correctly. This weight is the 3-7 RM for that exercise. Although the greatest improvements seem to come from resistances of about 6-RM, an effective range is a 3-7 RM. The weight should be heavy enough so that an eighth repetition would be impossible because of muscle fatigue.
The weight should also not be too heavy. If one cannot do at least three repetitions of an exercise, the resistance is too great and should be reduced. Soldiers who are just beginning a resistance-training program should not start with heavy weights. They should first build an adequate foundation by training with an 8-12 RM or a 12+ RM.
To develop muscular endurance, the soldier should choose a resistance that lets him do more than 12 repetitions of a given exercise. This is his 12+ repetition maximum (12+ RM). With continued training, the greater the number of repetitions per set, the greater will be the improvement in muscle endurance and the smaller the gains in strength. For example, when a soldier trains with a 25-RM weight, gains in muscular endurance will be greater than when using a 15-RM weight, but the gain in strength will not be as great. To optimize a soldier's performance, his RM should be determined from an analysis of the critical tasks of his mission. However, most soldiers will benefit most from a resistance-training program with an 8-12 RM.
Whichever RM range is selected, the soldier must always strive to over-load his muscles. The key to overloading a muscle is to make that muscle exercise harder than it normally does.
| An overload may be achieved by any of the following methods:
- Increasing the resistance.
- Increasing the number of repetitions per set.
- Increasing the number of sets.
- Reducing the rest time between sets.
- Increasing the speed of movement in the concentric phase. (Good form is more important than the speed of movement.)
- Using any combination of the above.
When an overload is applied to a muscle, it adapts by becoming stronger and/or by improving its endurance. Usually significant increases in strength can be made in three to four weeks of proper training depending on the individual. If the workload is not progressively increased to keep pace with newly won strength, there will be no further gains. When a soldier can correctly do the upper limit of repetitions for the set without reaching muscle failure, it is usually time to increase the resistance. For most soldiers, this upper limit should be 12 repetitions.
For example, if his plan is to do 12 repetitions in the bench press, the soldier starts with a weight that causes muscle failure at between 8 and 12 repetitions (8-12 RM). He should continue with that weight until he can do 12 repetitions correctly. He then should increase the weight by about 5 percent but no more than 10 percent. In a multi-set routine, if his goal is to do three sets of eight repetitions of an exercise, he starts with a weight that causes muscle failure before he completes the eighth repetition in one or more of the sets. He continues to work with that weight until he can complete all eight repetitions in each set, then increases the resistance by no more than 10 percent.
A resistance-training program should provide resistance to the specific muscle groups that need to be strengthened. These groups can be identified by doing a simple assessment. The soldier slowly does work-related movements he wants to improve and, at the same time, he feels the muscles on each side of the joints where motion occurs. Those muscles that are contracting or becoming tense during the movement are the muscle groups involved. If the soldier's performance of a task is not adequate or if he wishes to improve, strength training for the identified muscle(s) will be beneficial. To improve his muscular endurance and strength. in a given task, the soldier must do resistance movements that are as similar as possible to those of doing the task. In this way, he ensures maximum carryover value to his soldiering tasks.
Exercise must be done regularly to produce a training effect. Sporadic exercise may do more harm than good. Soldiers can maintain a moderate level of strength by doing proper strength workouts only once a week, but three workouts per week are best for optimal gains. The principle of regularity also applies to the exercises for individual muscle groups. A soldier can work out three times a week, but when different muscle groups are exercised at each workout, the principle of regularity is violated and gains in strength are minimal.
Consecutive days of hard resistance training for the same muscle group can be detrimental. The muscles must be allowed sufficient recovery time to adapt. Strength training can be done every day only if the exercised muscle groups are rotated, so that the same muscle or muscle group is not exercised on consecutive days. There should be at least a 48-hour recovery period between workouts for the same muscle groups. For example, the legs can be trained with weights on Monday, Wednesday, and Friday and the upper body muscles on Tuesday, Thursday, and Saturday.
There should be at least a 48-hour recovery period between workouts for the same muscle group.
Recovery is also important within a workout. The recovery time between different exercises and sets depends, in part, on the intensity of the workout. Normally, the recovery time between sets should be 30 to 180 seconds.
When developing a strength training program, it is important to include exercises that work all the major muscle groups in both the upper and lower body. One should not work just the upper body, thinking that running will strengthen the legs.
It is important to include exercises that work all the major muscle groups in both the upper and lower body.
Most muscles are organized into opposing pairs. Activating one muscle results in a pulling motion, while activating the opposing muscle results in the opposite, or pushing, movement. When planning a training session, it is best to follow a pushing exercise with a pulling exercise which results in movement at the same joint(s). For example, follow an overhead press with a lat pull-down exercise. This technique helps ensure good strength balance between opposing muscle groups which may, in turn, reduce the risk of injury. Sequence the program to exercise the larger muscle groups first, then the smaller muscles. For example, the lat pull-down stresses both the larger latissimus dorsi muscle of the back and the smaller biceps muscles of the arm. If curls are done first, the smaller muscle group will be exhausted and too weak to handle the resistance needed for the lat pull-down. As a result, the soldier cannot do as many repetitions with as much weight as he normally could in the lat pull-down. The latissimus dorsi muscles will not be overloaded and, as a result, they may not benefit very much from the workout.
The best sequence to follow for a total-body strength workout is to first exercise the muscles of the hips and legs, followed by the muscles of the upper back and chest, then the arms, abdominal, low back, and neck. As long as all muscle groups are exercised at the proper intensity, improvement will occur.
A major challenge for all fitness training programs is maintaining enthusiasm and interest. A poorly designed strength-training program can be very boring. Using different equipment, changing the exercises, and altering the volume and intensity are good ways to add variety, and they may also produce better results. The soldier should periodically substitute different exercises for a given muscle group(s). For example, he can do squats with a barbell instead of leg presses on a weight machine. Also, for variety or due to necessity (for example, when in the field), he can switch to partner-resisted exercises or another form of resistance training. However, frequent wholesale changes should be avoided as soldiers may become frustrated if they do not have enough time to adapt or to see improvements in strength.
Workouts for improving muscular endurance or strength must follow the principles just described. There are also other factors to consider, namely, safety, exercise selection, and phases of conditioning.
Major causes of injury when strength training are improper lifting techniques combined with lifting weights that are too heavy. Each soldier must understand how to do each lift correctly before he starts his strength training program.
The soldier should always do weight training with a partner, or spotter, who can observe his performance as he exercises. To ensure safety and the best results, both should know how to use the equipment and the proper spotting technique for each exercise.
A natural tendency in strength training is to see how much weight one can lift. Lifting too much weight forces a compromise in form and may lead to injury. All weights should be selected so that proper form can be maintained for the appropriate number of repetitions.
Correct breathing is another safety factor in strength training. Breathing should be constant during exercise. The soldier should never hold his breath, as this can cause dizziness and even loss of consciousness. As a general rule, one should exhale during the positive (concentric) phase of contraction as the weight or weight stack moves away from the floor, and inhale during the negative (eccentric) phase as the weight returns toward the floor.
When beginning a resistance-training program, the soldier should choose about 8 to 16 exercises that work all of the body's major muscle groups. Usually eight well-chosen exercises will serve as a good starting point. They should include those for the muscles of the leg, low back, shoulders, and so forth. The soldier should choose exercises that work several muscle groups and try to avoid those that isolate single muscle groups. This will help him train a greater number of muscles in a given time. For example, doing lat pull-downs on the "lat machine" works the latissimus dorsi of the back and the biceps muscles of the upper arm. On the other hand, an exercise like concentration curls for the biceps muscles of the upper arm, although an effective exercise, only works the arm flexor muscles. Also, the concentration curl requires twice as much time as lat pull-downs because only one arm is worked at a time.
Perhaps a simpler way to select an exercise is to determine the number of joints in the body where movement occurs during a repetition. For most people, especially beginners, most of the exercises in the program should be "multi-joint" exercises. The exercise should provide movement at more than one joint. For example, the pull-down exercise produces motion at both the shoulder and elbow joints. The concentration curl, however, only involves the elbow joint.
PHASES OF CONDITIONING
There are three phases of conditioning: preparatory, conditioning, and maintenance. These are also described in Chapter 1.
The three phases of conditioning are preparatory, conditioning, and maintenance.
The soldier should use very light weights during the first week (the preparatory phase) which includes the first two to three workouts. This is very important, because the beginner must concentrate at first on learning the proper form for each exercise. Using light weights also helps minimize muscle soreness and decreases the likelihood of injury to the muscles, joints, and ligaments. During the second week, he should use progressively heavier weights. By the end of the second week (4 to 6 workouts), he should know how much weight on each exercise will allow him to do 8 to 12 repetitions to muscle failure. If he can do only seven repetitions of an exercise, the weight must be reduced; if he can do more than 12, the weight should be increased.
The third week is normally the start of the conditioning phase for the beginning weight trainer. During this phase, the soldier should increase the amount of weight used and/or the intensity of the workout as his muscular strength and/or endurance increases. He should do one set of 8 to 12 repetitions for each of the heavy-resistance exercises. When he can do more than 12 repetitions of any exercise, he should increase the weight until he can again do only 8 to 12 repetitions. This usually involves an increase in weight of about five percent. This process continues indefinitely. As long as he continues to progress and get stronger, he does not need to do more than one set per exercise. If he stops making progress with one set of 8 to 12 repetitions per exercise, he may benefit from adding another set of 8 to 12 repetitions on those exercises in which progress has slowed. As time goes on and he progresses, he may increase the number to three sets of an exercise to get even further gains in strength and/ or muscle mass. Three sets per exercise is the maximum most soldiers will ever need to do.
Once the soldier reaches a high level of fitness, the maintenance phase is used to maintain that level. The emphasis in this phase is no longer on progression but on retention. Although training three times a week for muscle endurance and strength gives the best results, one can maintain them by training the major muscle groups properly one or two times a week. More frequent training, however, is required to reach and maintain peak fitness levels. Maintaining the optimal level of fitness should become part of each soldier's life-style and training routine. The maintenance phase should be continued throughout his career and, ideally, throughout his life.
As with aerobic training, the soldier should do strength training three times a week and should allow at least 48 hours of rest from resistance training between workouts for any given muscle group.
Timed sets refers to a method of physical training in which as many repetitions as possible of a given exercise are performed in a specified period of time. After an appropriate period of rest, a second, third, and so on, set of that exercise is done in an equal or lesser time period. The exercise period, recovery period, and the number of sets done should be selected to make sure that an overload of the involved muscle groups occurs.
The use of timed sets, unlike exercises performed in cadence or for a specific number of repetitions, helps to ensure that each soldier does as many repetitions of an exercise as possible within a period of time. It does not hold back the more capable performer by restricting the number of repetitions he may do. Instead, soldiers at all levels of fitness can individually do the number of repetitions they are capable of and thereby be sure they obtain an adequate training stimulus.
In this FM, timed sets will be applied to improving soldier's sit-up and push-up performance. (See Figures 3-2 and 3-3. ) Many different but equally valid approaches can be taken when using timed sets to improve push-up and sit-up performance. Below, several of these will be given.
It should first be stated that improving sit-up and push-up performance, although important for the APFT, should not be the main goal of an Army physical training program. It must be to develop an optimal level of physical fitness which will help soldiers carry out their mission during combat. Thus, when a soldier performs a workout geared to develop muscle endurance and strength, the goal should be to develop sufficient strength and/or muscle endurance in all the muscle groups he will be called upon to use as he performs his mission. To meet this goal, and to be assured that all emergencies can be met, a training regimen which exercises all be developed and followed. Thus, as a general rule, a muscle endurance or strength training workout should not be designed to work exclusively, or give priority to, those muscle groups worked by the sit-up or push-up event.
For this reason, the best procedure to follow when doing a resistance exercise is as follows. First, perform a workout to strengthen all of the body's major muscles. Then, do timed sets to improve push-up and sit-up performance. Following this sequence ensures that all major muscles are worked. At the same time, it reduces the amount of time and work that must be devoted to push-ups and sit-ups. This is because the muscles worked by those two exercises will already be pre-exhausted.
The manner in which timed sets for push-ups and sit-ups are conducted should occasionally be varied. This ensures continued gains and minimizes boredom. This having been said, here is a very time-efficient way of conducting push-up/sit-up improvement. Alternate timed sets of push-ups and timed sets of sit-ups with little or no time between sets allowed for recovery. In this way, the muscle groups used by the push-up can recover while the muscles used in the sit-up are exercised, and vice versa. The following is an example of this type of the body's major muscle groups must approach:
If all soldiers exercise at the same time, the above activity can be finished in about 3.5 minutes. As the soldiers' levels of fitness improve, the difficulty of the activity can be increased. This is done by lengthening the time period of any or all timed sets, by decreasing any rest period between timed sets, by increasing the number of timed sets performed, or by any combination of these.
To add variety and increase the overall effectiveness of the activity, different types of push-ups (regular, feet-elevated, wide-hand, close-hand, and so forth) and sit-ups (regular, abdominal twists, abdominal curls, and so forth) can be done. When performing this type of workout, pay attention to how the soldiers are responding, and make adjustments accordingly. For example, the times listed in the chart above may prove to be too long or too short for some soldiers. In the same way, because of the nature of the sit-up, it may become apparent that some soldiers can benefit by taking slightly more time for timed sets of sit-ups than for push-ups.
When using timed sets for push-up and sit-up improvement, soldiers can also perform all sets of one exercise before doing the other. For example, several timed sets of push-ups can be done followed by several sets of sit-ups, or vice versa. With this approach, rest intervals must be placed between timed sets. The following example can be done after the regular strength workout and is reasonable starting routine for most soldiers.
During a timed set of push-ups, a soldier may reach temporary muscle failure at any time before the set is over. If this happens, he should immediately drop to his knees and continue doing modified push-ups on his knees.
Finally, as in any endeavor, soldiers must set goals for themselves. This applies when doing each timed set and when planning for their next and future APFTs.
Major Muscle Groups
In designing a workout it is important to know the major muscle groups, where they are located, and their primary action. (See Figure 3-4.)
To ensure a good, balanced work-out, one must do at least one set of exercises for each of the major muscle groups.
The beginning weight-training program shown at Figure 3-5 will work most of the important, major muscle groups. It is a good program for beginners and for those whose time is limited. The exercises should be done in the order presented.
The weight-training program shown at Figure 3-6 is a more comprehensive program that works the major muscle groups even more thoroughly. It has some duplication with respect to the muscles that are worked. For example, the quadriceps are worked by the leg press/squat and leg extensions, and the biceps are worked by the seated row, lat pull-down, and biceps curl. Thus, for the beginner, this program may overwork some muscle groups. However, for the more advanced lifter, it will make the muscles work in different ways and from different angles thereby providing a better over-all development of muscle strength. This program also includes exercises to strengthen the neck muscles.
When doing one set of each exercise to muscle failure, the average soldier should be able to complete this routine and do a warm-up and cool-down within the regular PT time.
Key Points to Emphasize
| Some key points to emphasize when doing resistance training are as follows:
- Train with a partner if possible, This helps to increase motivation, the intensity of the workout, and safety.
- Always breathe when lifting. Exhale during the concentric (positive] phase of contraction, and inhale during the eccentric (negative) phase.
- Accelerate the weight through the concentric phase of contraction, and return the weight to the starting position in a controlled manner during the eccentric phase.
- Exercise the large muscle groups first, then the smaller ones.
- Perform all exercises through their full range of motion. Begin from a fully extended, relaxed position (pre-stretched), and end the concentric phase in a fully contracted position.
- Always use strict form. Do not twist, lurch, lunge, or arch the body, This can cause serious injury. These motions also detract from the effectiveness of the exercise because they take much of the stress off the targeted muscle groups and place it on other muscles.
- Rest from 30 to 180 seconds between different exercises and sets of a given exercise.
- Allow at least 48 hours of recovery between workouts, but not more than 96 hours, to let the body recover and help prevent over training and injury.
- Progress slowly. Never increase the resistance used by more than 10 percent at a time.
- Alternate pulling and pushing exercises. For example, follow triceps extensions with biceps curls.
- Ensure that every training program is balanced. Train the whole body, not just specific areas. Concentrating on weak areas is all right, but the rest of the body must also be trained.
When developing strength programs for units, there are limits to the type of training that can be done. The availability of facilities is always a major concern. Although many installations have excellent strength-training facilities, it is unreasonable to expect that all units can use them on a regular basis. However, the development of strength does not require expensive equipment. All that is required is for the soldier, three times a week, to progressively overload his muscles.
TRAINING WITHOUT SPECIAL EQUIPMENT
Muscles do not care what is supplying the resistance. Any regular resistance exercise that makes the muscle work harder than it is used to causes it to adapt and become stronger. Whether the training uses expensive machines, sandbags, or partners, the result is largely the same.
Sandbags are convenient for training large numbers of soldiers, as they are available in all military units. The weight of the bags can be varied depending on the amount of fill. Sandbag exercises are very effective in strength-training circuits. Logs, ammo boxes, dummy rounds, or other equipment that is unique to a unit can also be used to provide resistance for strength training. Using a soldier's own body weight as the resistive force is another excellent alternative method of strength training. Pull-ups, push-ups, dips, sit-ups, and single-leg squats are examples of exercises which use a person's body weight. They can improve an untrained soldier's level of strength.
Partner-resisted exercises (PREs) are another good way to develop muscular strength without equipment, especially when training large numbers of soldiers at one time. As with all training, safety is a critical factor. Soldiers should warm up, cool down, and follow the principles of exercise previously outlined.
In partner-resisted exercises (PREs) a person exercises against a partner's opposing resistance. The longer the partners work together, the more effective they should become in providing the proper resistance for each exercise. They must communicate with each other to ensure that neither too much nor too little resistance is applied. The resister must apply enough resistance to bring the exerciser to muscle failure in 8 to 12 repetitions. More resistance usually can and should be applied during the eccentric (negative) phase of contraction (in other words, the second half of each repetition as the exerciser returns to the starting position). The speed of movement for PREs should always be slow and controlled. As a general rule, the negative part of each exercise should take at least as long to complete as the positive part. Proper exercise form and regularity in performance are key ingredients when using PREs for improving strength.
Following are descriptions and illustrations of several PREs. They should be done in the order given to ensure that the exercising soldier is working his muscle groups from the largest to the smallest. More than one exercise per muscle group may be used. The PT leader can select exercises which meet the unit's specific goals while considering individual limitations:
A 36-to 48-inch stick or bar one inch in diameter may be used for some of the exercises. This gives the resister a better grip and/or leverage and also provides a feel similar to that of free weights and exercise machines.
TRAINING WITH EQUIPMENT
Units in garrison usually have access to weight rooms with basic equipment for resistance-training exercises. The exercises described here require free weights and supporting equipment. Although not shown below for the sake of simplicity, all exercises done with free weights require a partner, or spotter, to ensure proper form and the safety of the lifter.
Exercises Performed with an Exercise Machine
If exercise machines are available, the exercises described below also good for strength training. All movements, particularly during the are eccentric (negative) phase of contraction, should be done in a deliberate, controlled manner.
The following exercises can be performed to condition the muscles of the mid-section (erector spinae, rectus abdominus and external and internal obliques). As the soldier becomes more conditioned on these exercises, resistance can be added.
The chart labeled Figure 3-5 will help the soldier select appropriate exercises for use in developing a good muscular endurance and strength workout. For example, if the soldier wants to develop his upper leg muscles, he has several options. He may choose from the following: 1) PREs, concentrating on the split- or single-leg squat; 2) exercises with equipment, doing free weight squats; or, 3) exercises with a machine, doing leg presses, leg curls, and leg extensions.